HMR2300 magnetic Compass High Accuracy ±1 gauss compassing navigation sensor
Specification
| Characteristics | Conditions | Min | Typ | Max | Units |
| Power Supply |
| Supply voltage | Pin 9 referenced to Pin 5(Ground) | 6.5 | | 15 | Volts |
| Supply Current | Vsupply = 15V. With S/R= On | | 27 | 35 | mA |
| Temperature |
| Operating | Ambient | -40 | | +85 | ℃ |
| Storage | Ambient, Unbiased | -55 | | 125 | ℃ |
| Magnetc Fleld |
| Range | Full Scale (FS), Total Field Applied | -2 | | +2 | gauss |
| Resolution | Applied Field to Change Output | 67 | | | micro-gauss |
| Accuracy | RSS of all errors@+25℃
±1 gauss
±2 gauss | |
0.01
1 |
0.52
2 |
%FS
%FS |
| Lneariby Error | Best fit straight line@+25℃
±1 gauss
±2 gauss | |
0.1
1 |
0.5
2 |
%FS
%FS |
| Hysterisis Error | 3 Sweeps Across ±2gauss@+25°℃ | | 0.01 | 0.02 | %FS |
| Repeatability Error | 3 Sweeps Across+2gauss@+25°C | | 0.05 | 0.10 | %FS |
| Gain Enror | Applied Field for Zero Reading | | 0.05 | 0.10 | %FS |
| Offset Ermor | Applied Field for Zero Reading | | 0.01 | 0.03 | %FS |
Temperature
Effect | Coefficient of Gain | | -600
±114 | | ppm/"C |
| Power Supply Efiect | From+6 to +15V with 1 gauss Applied Field | | 150 | | ppm/V |
| Mechanical |
| Weight | PCB Only
PCB and Non-Flanged Enclosure
PCB and Flanged Enclosure | | 28
94
98 | | grams |
| Vibration | Operating
5 to 10Hz for 2 Hours
10Hz to 2kHz for 30 Minutes | |
10
2.0 | |
mm
g
|
▶ MAIN FEATURE
• High Accuracy Over ±1 gauss, <0.5% Full Scale
• Range of ±2 gauss, <70 µgauss Resolution
• Three Axis (X, Y, Z) Digital Outputs
• 10 to 154 Samples Per Second, Selectable
• RS-232 or RS-485 Serial Data Interfaces
• PCB or Aluminum Enclosure Options
• 6-15 volt DC Unregulated Power Supply Interface
▶ APPLICATION • Attitude Reference
• Compassing & Navigation
• Traffic and Vehicle Detection
• Anomaly Detection
• Laboratory Instrumentation
• Security System
The AVIC CMR2300 is a three-axis smart digital magnetometer to detect the strength and direction of an incident magnetic field. The three of AVIC’s magneto-resistive sensors are oriented in orthogonal directions to measure the X, Y and Z vector components of a magnetic field. These sensor outputs are converted to 16-bit digital values using an internal delta-sigma A/D converter. An onboard EEPROM stores the magnetometer’s configuration for consistent operation. The data output is serial full-duplex RS-232 or half-duplex RS-485 with 9600 or 19,200 data rates. A RS-232 development kit version is available that includes a windows compatible demo program, interface cable, AC adapter, and carrying case.
PCB dimension and PINOUT
tended-Base Enclosure, RS-232 I/O
CMR2300-D21-485 :Extended-Base Enclosure, RS-485 I/O
CMR2300-D20-232-DEMO :Demo Kit, Flush-Base Enclosure, RS-232 I/O
CMR2300-D21-232-DEMO :Demo Kit, Extended-Base Enclosure, RS-232 I/
Product Tags:
|
|
HMR2300 Magnetic Compass Navigation Sensor High Accuracy ±1 Gauss Images
|
